LASER GUIDED CONCRETE SCREED SERVICES
A laser screed machine is used to level concrete in large floor pours, by determining the correct elevation height, and vibrating the concrete to lessen air pockets, thus delivering a smoother surface. To do this, a laser-emitting device is placed outside the pour itself, which then interacts with laser receivers on either side of the screed head to keep the pour totally level. The screed machine is boom operated — meaning that the screed head booms out and then screeds (pulls) the concrete back towards the machine. At the same time, an auger inside the screed vibrates the concrete. The result is a uniform slab that is consistently flat, which in turn guarantees a sounder structure.
WHY CHOOSE LASER GUIDED CONCRETE SCREED SERVICES?
OUR TECHNOLOGY
NM Screed Rental is equipped to handle any size concert screed job, operating with the 2020 Ligchine Screed Saver Max with an 18-foot boom reach and a 10.5-foot, high-performance screed head.
OUR EQUIPMENT AND EXPERTISE
Once NM Screed is hired for the customer’s upcoming project, a date is scheduled for concrete to be poured. On the day of pouring, NM Screed will show up on site one to three hours before the first concrete mixing truck is scheduled. This allows NM Screed adequate time to set up all equipment. For flat slabs, set-up time is typically one hour, as the operator will unload the machine and set up all laser equipment. Once the machine and laser are set up, the finished floor is calculated using a grade rod and receiver. After the correct finished floor elevation is calculated, the operator will adjust the machine finish blade and laser receivers from each side of the machine, to get accurate flatness across the 10.5-foot screed head.
The operator is then ready for concrete to be poured. With the wireless remote control screed machine, our operators can walk around the slab as concrete is being poured. This allows them to view all angles and to avoid obstacles on the pad, such as plumbing, electrical, forms, tools, and people. The NM Screed operator will also work in conjunction with concrete laborers on the job site. Laborers are typically responsible for raking concrete immediately before screeding takes place.
The NM Screed team currently consists of Jared as the main operator and a second screed operator, Gabe. Both have the knowledge, experience and expertise to handle commercial, industrial and retail slabs of all sizes. With two screed machines, NM Screed Rental can be at two different job locations on the same day or at a large slab with both machines working together.
RELEVANT PAST PROJECTS
NM Screed Rental has successfully provided screed services to over 300 jobs since 2018, with slabs ranging as small as 2,000 square feet to 35,000 square feet in one pour. The operators and machines have the capability to complete larger pours in one day, if necessary. NM Screed Rental has provided screed services for numerous slabs for new Dollar General Stores all over New Mexico with various New Mexico general and concrete contractors.

